GALVANIC PROTECTION FOR EQUIPMENT AND PEOPLE AGAINST VOLTAGE SPIKES

Rererence: HELIOS_US

HELIOS is composed of 2 modules linked by a double plastic optic fiber line (simplicity of operation).
The fiber optic line is armed with a Kevlar shield permitting an aerial installation, as well as a buried one.
Maximum distance between the 2 modules : 80 meters. Transmission is digitalized.
Terminal side :
The card is supplied in 12V or 48V = (alimentation 230V or 57V~ in option).
Terminal side is delivered in a waterproof case, or can be integrated in an application.
Line side :
The card is molded in a high strength dielectric resin (humidity and water proof)
This module is self powered by the telecommunication line and does not require to be earthed.

Galvanic protection for equipment and people against voltages spikes

Rererence: HELIOS_C_US

HELIOS C is a galvanic protection case having on one side « Line » and on the other side « Terminal ».
The galvanic insulation is greater than 8 KV RMS, 50 Hertz. It can also be 25 Hertz if requested.
The electronics are moulded in a high dielectric resin.
- Line side : HELIOS C is self-supplied (Neither batteries nor solar panels).
- Terminal side : The Terminal supply is generated by HELIOS C.

Galvanic protection for equipment and people against voltages spikes

Rererence: HELIOS_D_US

HELIOS D is a galvanic protection case having on one side « Line » and on the other side « Terminal ».
The galvanic insulation is greater than 8 KV RMS, 50 Hertz. It can also be 25 Hertz if requested.
The electronics are moulded in a high dielectric resin.
- Line side : HELIOS D is self-supplied (Neither batteries nor solar panels).
- Terminal side : The Terminal supply is generated by HELIOS D.

Galvanic protection for equipment and people against voltages spikes

Rererence: HELIOS_E_US

HELIOS E is a galvanic protection case having on one side « Line » and on the other side « Terminal ».
The galvanic insulation is greater than 8 KV RMS, 50 Hertz. It can also be 25 Hertz if requested.
The electronics are moulded in a high dielectric resin.
- Line side : HELIOS E is self-supplied (Neither batteries nor solar panels).
- Terminal side : The TNR supply is generated by HELIOS E.

Galvanic protection for equipment and people against voltages spikes

Rererence: HELIOS_F_US

ELIOS F is a galvanic protection case having on one side « Line » and on the other side « Terminal ».
The galvanic insulation is greater than 8 KV RMS, 50 Hertz. It can also be 25 Hertz if requested.
The electronics are moulded in a high dielectric resin.
- Line side : HELIOS F is self-supplied (Neither batteries nor solar panels).
- Terminal side : The xDSL modem supply is generated by HELIOS F.

GALVANIC PROTECTION FOR EQUIPMENT AND PEOPLE AGAINST VOLTAGE SPIKES

Rererence: HELIOS_G_RADIO_US

HELIOS G-Radio is composed of 2 modules connected thanks to a RADIO link (easier to install).
This system allows to avoid aerial cables between the two modules during the installation.
Maximum distance between the 2 modules : < to 100 m in free field.
Dielectric strength : unlimited. Transmission is digitalized.
Terminal side :
The card is alimented in 12V or 48V = (supply 230V or 57V~ in option)
Line side :
The card is molded in a high strength dielectric resin (protection against humidity)
This module is self-powered from the telecom line and does not need to be earthed.

Galvanic protection for equipment and people against voltages spikes

Rererence: HELIOS_H_US

HELIOS H is presented in a unique case, having a line access and a terminal access.
The galvanic insulation is greater than 6 KV RMS during 1 minute at 50 Hertz.
The electronic part is molded in high dielectric resin.
HELIOS H is installed on leased analogical lines 2 wires/4 wires for constant transmissions between two permanent points.
Electrical signals are transmitted on the phone bandwidth 300 – 3400 Hz with a nominal impedance of 600 Ω.